![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/1-5.jpg\")
<\/p>\nMarket stalls are often useful for medieval builds, and having a variety of designs to work with keeps your vendor areas from getting boring.<\/p>\n
The first design just uses 1×2 curved slopes, a few basic 2-wide plates, and 1×1 plates with vertical tooth. I used bright light orange and white here, but of course you can use any color combo that fits your specific build!<\/p>\n
<\/p>\n
With the canopy constructed, you just add the poles, which are made up of 6 long bars, a cone, and a 1×1 plate round with hole.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/2-5.jpg\")
<\/p>\n
And it should end up looking like this.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/3-5.jpg\")
<\/p>\n
For this next design I made the canopy an odd number of studs wide so that I could have the same color stripe on each end. As with the previous design, the core is made up of basic plates, and then is finished off with 1×3 curved slopes and 1×2 bows. Some gold 1×1 round plates add a little extra decoration, if desired.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/4-5.jpg\")
<\/p>\n
What the assembly looks like from the bottom.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/5-5.jpg\")
<\/p>\n
The poles for this stall are a little different. I still used a few 6 long bars and cones, but this time they are topped with light saber hilts.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/6-5.jpg\")
<\/p>\n
Assemblies made up of headlight bricks, 1×1 plate rounds, more light saber hilts, and three long bars make up the front poles.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/7-4.jpg\")
<\/p>\n
With the back poles in place, it’s easy to rotate the front poles so that the bars rest against each other.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/8-4.jpg\")
<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/9-4.jpg\")
<\/p>\n
This gives more space for goods under the tent.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/10-4.jpg\")
<\/p>\n
This next design is probably one of the simplest, and yet still very effective designs that I’ve come up with. Start off by attaching four 6-long bars to cones. 2 of those will also get a 1×1 round plate on the bottom. Once the poles are in place, you just rest the canopy on top of them.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/11-4.jpg\")
<\/p>\n
Which should look like this. It gives the whole stall a nice slanted roof, and is still quite sturdy.<\/p>\n
![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/12-4.jpg\")
<\/p>\n
The last design we’ll be looking at today was inspired by Mark of Falworth’s market stand that he used in his creation, The Grand Bazaar. <\/a><\/em><\/p>\n Once again, the bases consists mainly of plates. On top of those, we’ll be adding 1×4 curved slopes in whatever color you want your stall to be. Under the curved slopes, attach 1×1 brick modified with stud on side. 1×2 plates matching the slope colors are then added to the brick with stud.<\/p>\n Then you can put it on the poles.<\/p>\n If you want, you can also add 1×1 round gold tiles to the bottom studs of the row of 1×2 plates in the front.<\/p>\n Thanks for reading, if you have any questions, comments, or suggestions for future tutorials, let us know in the comments!<\/p>\n","protected":false},"excerpt":{"rendered":" Market stalls are often useful for medieval builds, and having a variety of designs to work with keeps your vendor areas from getting boring. The first design just uses 1×2\u2026<\/p>\n![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/13-4.jpg\")
<\/p>\n![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/14-3.jpg\")
<\/p>\n![\"\"](\"http:\/\/www.brickbuilt.org\/wp-content\/uploads\/2018\/08\/15-3.jpg\")
<\/p>\n