Here’s a look inside the build process for my Expert Artisan Prize model. I started off with a simple grid of plates to make the base. Plate modified with stud…
Here is our third Titan Tot, Fortrokks! This build is a prize in the Colossal Castle Contest, so check out the rules and get building if you would like your…
This article was originally published in Brick Fanatics Magazine and is reproduced here with permission. Here is a model of the GoPro Hero 3+ with a simple mount included. In…
My entry for Guilds of Historica Book III Challenge IV, Category A. I really wanted to sneak a build in for this challenge, and also saw it as a chance…
This is our second guide focusing on Modern Furniture, but unlike most of our previous furniture these designs aren’t built at minifigure scale. First is an arm chair that uses…
Here is my contribution for the InnovaLUG alt-build challenge using #70676 Lloyd’s Titan Mech. Eight different builders came up with an alt-build using this set, and it’s your job to…
This is what I came up with for an InnovaLUG alt-build challenge using #70676 Lloyd’s Titan Mech. Eight different builders came up with an alt-build using this set, and it’s…
Boba-1980 built this fabulous rendition of Link’s House from Breath of the Wild. The tan and dark bley combination captures the worn plaster over stone walls nicely, and the vibrant…
Here is round 19 in our series of Finest Creations! Check out previous rounds here. Our system works as follows: John and I each choose 5 of our best creations…
When working on a land vehicle I often start by selecting the tires. Which was the case again for this model. Here you can see some of the options I…
