Here is our third Titan Tot, Fortrokks! This build is a prize in the Colossal Castle Contest, so check out the rules and get building if you would like your…
This article was originally published in Brick Fanatics Magazine and is reproduced here with permission. Here is a model of the GoPro Hero 3+ with a simple mount included. In…
This is our second guide focusing on Modern Furniture, but unlike most of our previous furniture these designs aren’t built at minifigure scale. First is an arm chair that uses…
John’s Titan Tot concept looked so fun that I had to try one of my own. Iceskal is also a donation to Creations for Charity, so keep an eye out…
Just over a week until the longest running contest in the LEGO community starts again! If you’re not familiar with the Colossal Castle Contest, it’s a large scale medieval contest…
This is what I came up with for an InnovaLUG alt-build challenge using #70676 Lloyd’s Titan Mech. Eight different builders came up with an alt-build using this set, and it’s…
This technique was designed to work with my Bar and Clip Brickwork. 1×1 brick with stud are used to attach 1×1 bricks and cheese slopes for the stonework on either…
Ready for another extremely detailed build log on a Marchitecture build?Then let’s get going! You might want to check out my main reference image as you read.The maximum width of…
Here is round 19 in our series of Finest Creations! Check out previous rounds here. Our system works as follows: John and I each choose 5 of our best creations…
The hanging bundles and baskets in my Harburg Kitchen were an extremely popular detail. So this post explains how they are made. Whips are the key component. They can easily…
