Our second tutorial on doors covers three designs. You can see the first Doors and Gates tutorial here. We’ll start off with a door design that I used in a…
ShoelaceAglet on Eurobricks requested a tutorial covering small footbridges, so here are four different stone footbridge designs. We’ll start with one that was used in our Town of Khevroa build.…
I’ve already covered a large onion dome design in another post, but today we’ll be looking at a smaller design. To start off, we’ll need a 2×2 plate, 4 headlight…
Today we’ll be taking a look at a tower design I used in my Fabled Fortress of Al-Danah creation. The basic core is made up of a mix of brackets,…
Oirad72 kindly shared his nifty roof design that utilizes shovels to create an excellent shingle look. Basic two stud wide plates, jumper plates, 1×1 tile with clip, 1×1 round plates,…
Master builder Dubbadgrim shares an innovate base design in this month’s featured tutorial. “I came up with this technique while building within a 16 x 16 stud size constraint. It…
I first came up with this design for use in my Double Trouble on Staor Mountain build. And while it’s a fairly parts intensive design, it gives a nice symmetrical…
This is a useful conical roof design for small round towers and turrets. Below are the parts needed for the roof. This is the main assembly, which uses quite a…
This tutorial follows up on our recent Mottled Stone Wall Tutorial, to finish a combination wood and stone bridge. Working off of the previous stonework base, you start by adding…
For the month of April we asked Patrick B. to share some of his clever animal designs. He kindly contributed a tutorial covering a wide range of creatures. “Hello everybody!…
